Specialty Lighting - Bendalite

	800-236-3254
	8am - 5pm m-f est

Decorative Lighting

Disco Lights

Disco Lighting Accessories

info | home | view cart

search:

go

HOW DOES BEND-A-LITE WORK?
What can you do with Bend-A-Lite? New uses are constantly being developed for Bend-A-Lite. Your creativity is your only limit. Here is just a brief list of some common uses. Attract Attention - Create Excitement - Extravaganzas - Landscaping - Outline Buildings - Exhibit Booths - Signs - Decorations - Bars - Vans - Motor homes - Boats & Cars - Dance Floors - Pools & Spas - Cabinets - OEM Products - Amusements - Games. Bend-A-Lite is the answer to hundreds of hard to light areas and old lighting dilemmas. Can Bend-A-Lite be cut? Yes. Bend-A-Lite may be cut with common scissors at 18 inch increments. Chasing and Duo-Color Bend-A-Lite can be cut at 36 inch increments. Cut points are clearly marked. Together with our Splicer and 6 ft. Electrical cord, you may then easily re-electrify Bend-A-Lite in just seconds..
BEND-A-LITE IS EASY TO CUT TO LENGTH
Can Bend-A-Lite be spliced to other colors or different lengths? Yes. Up to 150 feet of Bend-A-Lite can be plugged into an outlet regardless of how many colors are spliced together. This works great with our 8 Brilliant Neon Colors.
8 BRILLIANT NEON COLORS	SPLICER JOINS DIFFERENT COLORS OR LENGTHS
Can bulbs be changed? Yes. If several bulbs were to eventually burn out in a series, an 18 inch section may be cut out and a new one easily spliced in. If one bulb goes out, do they all go out? No! With Bend-A-Lite's special wiring, only that particular bulb goes out. The rest remain shining bright as ever. Because of the special Bend-A-Lite polymer used, light continues to pass through avoiding dark spots. How much electricity does Bend-A-Lite draw? Bend-A-Lite has been economically designed and engineered. A standard 30 foot roll containing 360 bulbs uses slightly more than 150 watts. How do you attach Bend-A-Lite? There are many ways to attach Bend-A-Lite. When attached to wood, metal or mica, our snap clips, conduit clips or channels give quick and professional results. There are dozens of alternatives depending on your particular use. Is Bend-A-Lite UL Listed Yes. Standard 110 volt Bend-A-Lite in both 1/2 and 3/8 inch diameters have been UL Listed.
ATTRACT ATTENTION & CREATE EXCITEMENT!

Decorate Stairs	Bend and create sculptures	BEND-A-LITE in rolls

Spice up Night Clubs

Info | Shopping List | Specialty Lighting | View Cart